[ROM] CM10.1 for WAVE and WAVE 2


CM10.1 for WAVE and WAVE 2
Android Jellybean 4.2.2

READ http://code.google.com/p/badadroid/ and http://code.google.com/p/badadroid/w…AskedQuestions BEFORE POSTING (thanks to huntkb for updating it)

FEATURES
Android 4.2.2
CM sources of 21.10.2013
Updated to linux kernel version 3.0.86
272 MB RAM
F4k 720p patch for bigmem kernels (Video Fix)
New key Mapping:
– call key as CALL, Middle as HOME, endcall as ENDCALL
– Long press ENDCALL will show power menu
– lock key as POWER, framework patch is not yet ported
– Navigation Bar activated
– PIE control can be activated with Expanded desktop

GAPPS
http://goo.im/gapps/gapps-jb-20130301-signed.zip full gapps
flash through CWM (recovery)

KNOWN BUGS (what doesn’t work):
– MMS receiving
– Network registration don’t work with some SIM cards
– GPS
– Conference Calls
– Bluetooth headset in calls
– Don’t leave phone charging without supervising – if it gets enormously hot, disconnect it – this can literally blow up battery as there is no overheating protection yet. Do not leave it connected on 100% – it’ll discharge by 1% all the time, and then recharge, what’s very unhealthy for battery.
Maybe something else, what i forgot

SUPPORT
You get none. Zero. Zip. We obligate ourselves to providing nothing further. You are on your own and will have to help each other via this thread. This is provided “as-is”, and if you don’t like it, use Bada or other releases.

We basically lack time to give full dedication to this rom, and we’re looking for skilled devs who know the Android, and/or other things that might be relevant.

Please join us on IRC: some people are on #badadroid (freenode).

FIRST INSTALLATION
Bada 2.0 is required

  1. Enter Bada Settings->General->Memory and make sure you have at least:
    370MB of free “System” memory
    160MB of free “User” memory
    400MB of free “Applications” memory
  2. Download BOOTFILES, armlinux_boot for your device from http://goo.im/devs/Rebellos/wave (please pay attention if it’s S8500 or S8530 BOOTFILES and FOTA you’re choosing!):
  3. Download ROM: http://www.multiupload.nl/PR4599CF5V
  4. Start Bada.
  5. Extract zImage from zip and copy it to the Bada’s User partition (the one about 390MB big).
  6. Copy whole .zip to the Bada’s User partition.
  7. Flash BOOTFILES and FOTA using Multiloader.
  8. Reboot the phone holding Power and Call key.
  9. FOTA set of red messages should appear, after about 15seconds Badadroid logo shows up.
  10. Be patient, first bootup will keep unresponsible on Badadroid logo for up to 5 minutes.
  11. CWM Recovery starts, pick:
    – install zip from sdcard
    – choose zip from sdcard
    – cm-10.1-wave-<release id>.zip
    – Yes – install
  12. Reboot holding the Power key

You can remove installation .zip from the User partition from Android level by connecting through USB in MTP mode.
Do not remove zImage file.
Normal bootup is available using Power+Call keys
CWM Recovery mode is available using Power+Volume Up keys
CWM Flashing does overwrite zImage. So every next update you can just flash .zip through CWM.

HOW TO UNINSTALL
Follow the steps there: http://forum.xda-developers.com/show…&postcount=393

CHANGELOG:
BT fix for Wave 2 http://www.multiupload.nl/JAPFB1FLNS Thanks BenzoX for testing
Just Flash it via Recovery

Kernel update for v 2.0 http://www.multiupload.nl/E68CJFUHGK
– Fixed wave 2 screen calibration. thanks to krischat1001

RIL_update2 for v2.0 http://www.multiupload.nl/E1JBJU4LTS
– some memory leaks fixed
– set low level debug AMSS
– some another fixes, probably can resolve restart in long idle state

RIL Update for v2.0 http://www.multiupload.nl/OP6YZQJ09Z
– Fix for IMSI reading
I hope now mobile internet will be work on all phones
APN settings should load automatically. Most of APN is stored in ROM in system/etc/apns-config.xml
If APN is not loaded automatically check this file and add APN settings in it, if there are no in it.

v2.0 http://www.multiupload.nl/PR4599CF5V
– CM sources 21.10.2013
Mobile internet is fixed
– Fixed search available networks and select networks
– Fixed PIN and PUK entering
– Fixed SIM PIN enable/disable/change
– Fixed sending MMS, receiving is still not working
– Fixed network indicator

v1.3 http://www.multiupload.nl/DYXUMPUCQX
– CM sources of 26.09.2013
– [RIL] Сompleted CALL interface, except conference call, but i really never use it before.
If you report bug please attach logs with detailed description, i really tested most of causes with hangup, activate and holding calls and etc, but it is too many cases, and probably i didn’t meet some and don’t know that this cause is exist.
– Some optimization from platform side, ported from aries

RIL Update2 for v1.2 http://www.multiupload.nl/NMIONOUBJ9
– Reworked Call interface
– Just flash it via Recovery

RIL Update for v1.2 http://www.multiupload.nl/CSTPY6UKNU
– [SIM] Corrected reading SMSC from SIM card
– [CALL] Added DTMF support
– Just flash it via Recovery

v1.2 http://www.multiupload.nl/3QF7PV7HJR
– CM sources of 17.09.2013
– Added TARGET_ARCH_LOWMEM for Dalvik
– Fixed gsm voicecall common setting in audio codec (Big Thanks for Tigrouzen)
– Fixed all audio ril pathes except Bluetooth audio pathes

Kernel Update for v1.1 http://www.multiupload.nl/LM89AO62TG
– Audio recording and video recording fixed
– So now we can use VoIP applications on wave with Wi-Fi
– Audio in call is still broken
Big thank to Rebellos. i just found good topic on ALSA forum with solution and Rebellos implemented solution

v1.1 http://www.multiupload.nl/H0THJFGQAQ
– CM sources of 14.08.2013
– Fixed vibrator (Thanks to Rebellos)
– Fixed ENDCALL button behavior(Forgot to include it in v1)

v1 http://www.multiupload.nl/KT7LG7HXDJ
Initial release
CM sources of 8.08.2013
Update compared to Rebellos CM10 ROM http://forum.xda-developers.com/show….php?t=1851818
– Android 4.2.2 CM10.1 based
– Updated to linux kernel version 3.0.86
– ROW i/o scheduler
– 272 MB RAM
– F4k 720p patch for bigmem kernels (Video Fix)
– New key mapping
– Navigation bar activated

THANKS TO
Special thanks to Rebellos for his CM10 ROM, for his good sources and many time, what he spent for my learning
Another Badadroid devs: Oleg_k, mijoma, nbates66, anghelyi, mikegapinski, hunktb, autra, Tigrouzen and many others.
CyanogenMod team for base ROM
Paulk and Replicant project for good base for bada-modem RIL
and many other who help us.

MORE LINKS
Overall project thread – http://forum.xda-developers.com/show….php?t=1459391

SOURCE : http://forum.xda-developers.com/showthread.php?t=2400126

Advertisements